Technology Support
The fix process

1.   Move the former igniter. Then fix the anti-theft igniter.

2.   Turn off the electric door lock and connect the black line with the cathode. Then the red line connects the electric door lock (this line will be discovered only when the lock is opened.)

3.   The yellow line and the white line are the control lines. They should be separately connected to the electro-equipment anode at will (such as flash lamp of left and right, high beam or dipped headlight). The two control lines must be in order or the igniter won’t work. First put though the yellow line and then the white line. If the order is wrong, the igniter will be locked immediately. Under such situation, the motorcycle can’t be driven no matter how the yellow line and the white line is connected. The only way to open the lock is to close the electric door lock for two seconds, then open it and connect the yellow line and the white line in order.

For example, the yellow line connects the anode line of the left steering light and the white line connects the anode line of the right steering light. After opening the electric door lock, you should open the switch of the left veer light and then the right to start up (if manipulation is wrong you should close the electric door lock for two seconds, then open it to manipulate again.).

Operation introduction

Firstly, turn on the power lock. Turn on the switch which is connected with yellow line, and then turn it off; secondly, turn on the switch which is connected with white line, and then turn it off. Finally, start up the motor vehicle.

For instance: connect the yellow line with the positive pole of left turn signal and connect the white line with the positive pole of right turn signal. Before start up the motor vehicle, turn on the power lock. Make left turn signal to flicker 1 time and then make right turn signal to flicker 1time. (If miss-operation, please turn off the power lock and waiting for 2 seconds, then turn on the power lock, re-operation again.).